Workpiece definition
Reviewed as one layer of the complete system and confirmed against adjacent interfaces.
Include in RFQ ↗
CUSTOM & OEM
Application-Specific Robot Configuration
Select the robot from the workpiece, process and production target back.
What can be configured
Configuration depth depends on technical feasibility, supply route, certification, commercial volume and the approved delivery scope.
Process package
Reviewed as one layer of the complete system and confirmed against adjacent interfaces.
Include in RFQ ↗Robot platform
Reviewed as one layer of the complete system and confirmed against adjacent interfaces.
Include in RFQ ↗Controller / fieldbus
Reviewed as one layer of the complete system and confirmed against adjacent interfaces.
Include in RFQ ↗EOAT and fixtures
Reviewed as one layer of the complete system and confirmed against adjacent interfaces.
Include in RFQ ↗Vision / sensing
Reviewed as one layer of the complete system and confirmed against adjacent interfaces.
Include in RFQ ↗Cell peripherals
Reviewed as one layer of the complete system and confirmed against adjacent interfaces.
Include in RFQ ↗Safety concept
Reviewed as one layer of the complete system and confirmed against adjacent interfaces.
Include in RFQ ↗Selection and approval factors
- Part presentation
- Total moving mass and moments
- Reach versus usable access
- Process dwell time
- Model mix and changeover
- Acceptance test
- Partner interfaces
A controlled project path
- 01Application inputs
- 02Feasibility review
- 03Platform selection
- 04Configuration / BOM
- 05Commercial review
- 06Validation plan
- 07Release
Common questions
01Can you customize a complete robot system, not only the arm?+
Yes. A project may configure the body, controller, EOAT, process package, fixtures, positioner, vision, sensors, safety, software interfaces and peripherals. Feasibility is confirmed during review.
02Do you manufacture every part and integrate every system in-house?+
No. TubeFrame Automation leads requirements, selection, configuration and project coordination, while qualified manufacturing and integration partners may perform defined work packages.
03What do you need for a robot recommendation?+
Provide the workpiece drawing or photos, material, dimensions, mass, process, cycle/output, accuracy, environment, layout, utilities, safety, destination, preferred brand and budget range.
04What files can I upload?+
PDF, JPG, PNG, STEP, STP, IGES, IGS, DXF, DWG and ZIP files are accepted within the configured size limit for project evaluation.
05How quickly will you respond?+
Initial project inquiries are normally answered within 12 business hours. Technical resolution and service response times are defined in the project or order documents.
START WITH THE WORKPIECE
Request a robot configured around the application.
Share the workpiece, process and target. We’ll identify the missing inputs and the next engineering step.